Excellent Elasticity, High Bonding&Peeling Strength, Outstanding Recovery Properties
Hotmelt Film and Tape, Fabric Coating, Toe Puffs&Counters, etc.
| Properties |
Standard |
Unit |
H190 |
H290 |
H290H |
H295 |
H570 |
H680 |
H690 |
H220E |
| Density |
ASTM D792 |
g/cm3 |
1.2 |
1.2 |
1.2 |
1.2 |
1.2 |
1.2 |
1.2 |
1.2 |
| Hardness |
ASTM D2240 |
Shore A |
97 |
97 |
97 |
95 |
75 |
80 |
90 |
95 |
| Tensile Strength |
ASTM D412 |
MPa |
35 |
25 |
30 |
30 |
15 |
20 |
32 |
35 |
| Elongation at Break |
ASTM D412 |
％ |
650 |
700 |
700 |
700 |
600 |
500 |
450 |
650 |
| Tfb |
- |
℃ |
70 |
60 |
60 |
60 |
105 |
120 |
135 |
85 |
| R&B Softing Point |
ASTM D6493 |
℃ |
140 |
80 |
90 |
110 |
125 |
140 |
- |
- |
| Tack-Free Time |
- |
min |
5 |
4 |
4 |
3 |
8 |
6 |
2 |
13 |
NOTE: The above values are shown as typical values and should not be used as specifications.
For optimum results, previous drying of the product during 3-4 hours at given temperature in the TDS.
The products can be used for injection molding or extrusion, and please check more details in the TDS.
| Processing Guide for Injection Molding | Processing Guide for Extrusion | |||
| Item | Parameter | Item | Parameter | |
| Nozzle(℃) |
Given in the TDS |
Die(℃) |
Given in the TDS |
|
| Metering Zone(℃) | Adapter(℃) | |||
| Compression Zone(℃) | Metering Zone (℃) | |||
| Feeding Zone(℃) | Compression Zone (℃) | |||
| Injection Pressure(bar) | Feeding Zone (℃) | |||
We have full certifications, such as ISO 9001, ISO 14001, ISO 45001, IATF 16949, CNAS National Laboratory