Excellent Abrasion Resistance, Oil/Chemicals Resistance, Good Resilience Performance, High Pressure Resistance, Outstanding Mechanical Properties
Convey or Belt, Hose&Tube, Seal&Gasket, Compounding, Wire&Cable, Automotive, Footwear, Caster, Film, Overmolding, etc.
| Properties | Standard | Unit | E175 | E180 | E185 | E190 | E195 | E155D | E165D | E175D | |
| Density | ASTM D792 | g/cm3 | 1.18 | 1.19 | 1.19 | 1.19 | 1.2 | 1.21 | 1.21 | 1.22 | |
| Hardness | ASTM D2240 | A/D | 75/- | 82/- | 86/- | 92/- | 95/- | -/55 | -/65 | -/75 | |
| Tensile Strength | ASTM D412 | MPa | 20 | 30 | 35 | 45 | 50 | 42 | 45 | 40 | |
| 100％ Modulus | ASTM D412 | MPa | 3 | 4 | 6 | 9 | 11 | 15 | 22 | 30 | |
| 300％ Modulus | ASTM D412 | MPa | 6 | 8 | 10 | 20 | 23 | 30 | 40 | 35 | |
| Elongation at Break | ASTM D412 | % | 600 | 550 | 550 | 450 | 400 | 380 | 350 | 300 | |
| Tear Strength | ASTM D624 | kN/m | 70 | 90 | 100 | 125 | 145 | 160 | 220 | 240 | |
| Compression Set | 22 hours @70℃ | ASTMD395 | % | / | 40 | 43 | 46 | 45 | 48 | 50 | 50 |
| 72 hours @23℃ | % | / | 28 | 15 | 30 | 32 | 20 | 21 | 18 | ||
NOTE: The above values are shown as typical values and should not be used as specifications.
For optimum results, previous drying of the product during 3-4 hours at given temperature in the TDS.
The products can be used for injection molding or extrusion, and please check more details in the TDS.
| Processing Guide for Injection Molding | Processing Guide for Extrusion | |||
| Item | Parameter | Item | Parameter | |
| Nozzle(℃) |
Given in the TDS |
Die(℃) | Given in the TDS | |
| Metering Zone(℃) | Adapter(℃) | |||
| Compression Zone(℃) | Metering Zone (℃) | |||
| Feeding Zone(℃) | Compression Zone (℃) | |||
| Injection Pressure(bar) | Feeding Zone (℃) | |||
All the products are well inspected during the production and after production. Certificate of Analysis (COA) could be provided together with the products.
We have full certifications, such as ISO 9001, ISO 14001, ISO 45001, IATF 16949, CNAS National Laboratory