OEM/ODM Factory Tpu Pvc - E1 Series Excellent Abrasion Resistance Polyester-based TPU – Miracll

Product Detail

Features

Excellent Abrasion Resistance, Oil/Chemicals Resistance, Good Resilience Performance, High Pressure Resistance, Outstanding Mechanical Properties

Application

Belting, Hose&Tube, Seal&Gasket, Compounding, Wire&Cable, Automotive, Footwear, Caster, Film, Over-molding, etc.

Properties	Standard		Unit	E175	E180	E185	E190	E195	E155D	E165D	E175D
Density	ASTM D792		g/cm³	1.18	1.19	1.19	1.19	1.2	1.21	1.21	1.22
Hardness	ASTM D2240		Shore A/D	74/-	82/-	86/-	92/-	95/-	-/55	-/65	-/75
Tensile Strength	ASTM D412		MPa	22	35	40	45	50	52	55	60
100%Modulus	ASTM D412		MPa	3	5	7	10	15	16	22	35
300%Modulus	ASTM D412		MPa	7	12	15	24	35	38	40	43
Elongation at Break	ASTM D412		％	600	550	500	450	400	380	350	300
Tear Strength	ASTM D624		kN/m	75	100	120	140	160	180	200	240
DIN Abrasion Loss	DIN 53516		mm3	/	30	30	35	35	35	35	40
Tg	DSC		℃	-42	-40	-37	-32	-30	-26	-22	-15
Compression Set	22 hours @70℃	ASTMD395	％	/	18	21	24	25	28	30	32
Compression Set	24 hours@100℃	ASTMD395	％	/	28	30	33	35	36	38	40

NOTE: The above values are shown as typical values and should not be used as specifications.

Processing Guide

For optimum results, previous drying of the product during 3-4 hours at given temperature in the TDS. The products can be used for injection molding or extrusion, and please check more details in the TDS.

Processing Guide for Injection Molding		Processing Guide for Extrusion
Item	Parameter	Item	Parameter
Nozzle(℃)	Given in the TDS	Die(℃)	Given in the TDS
Metering Zone(℃)		Adapter(℃)
Compression Zone(℃)		Metering Zone (℃)
Feeding Zone(℃)		Compression Zone (℃)
Injection Pressure(bar)		Feeding Zone (℃)

Inspection

All the products are well inspected during the production and after production. Certificate of Analysis (COA) could be provided together with the products.